 Model Number |
HFT-1300 slitting machine |
HFT slitting machien is suitable to slit BOPP film, sticker paper, paper, PVC film, AL foil.
Hong Kong Hongfat hardware and machinery manufacturing co.,ltd. which have focused on printing machine for 29 years.
(Product Item)
1. Shaftless letterpress full/intermittent rotary printing machine( print all kinds of sticker label)
2. Automatic label printing machine.
3. Hot-stamping machine.
4. Rotary letterpress for garment label.
5. Die-cutting machine
6. Slitting machine (Slitting, BOPP film, OPP film, Sticker paper)
7. Coating machine (Producing Sticker paper, PVC film, lamination film, electronic tape, double side tape, BOPP tapes).
8. Cutter
1. Technical specification of HFT-1300 slitter
Material: CPP+BOPP+PE+AL FOIL+PAPER
Thickness: more than 12μm.
Unwinding width??00 mm -1300 mm.
Unwinding diameter: max.1000 mm;
Unwinding core??″ & 6″ paper core.
Rewinding width: min. 50 mm.
Roll face width: 1400 mm
Rewinding core: 3″ paper core.
Rewinding diameter: max 500mm
Machine speed??ax.400m/min (related to material width of winding and slitting and quality of core, etc.??
Cutting mode: Shear knife & round knife
Machine size: without operation panel and Unload device
About 3500mm??ength??times;3000mm??idth??times;1600mm??eight???
Color: manufacturer’s standard
Working condition: prepared by the Buyer
Power??80V±10%??0HZ±5%??0KVA, 3 phases AC??
Compressed Air: 0.6Mpa.
2. Equipment List
2.1 Unwinding System: shaftless unwinding
Including: Unwinding Bracket, Tension Control System, E+L etc.
There are unwinding arms on the unwinding bracket, and one of them install a pneumatic brake or air pressure fraction for unwinding.
Clamp of unwinding core: the unwinding roll can be loaded by a trolley or lifted by power gourd to the working position, and tipped by the air cylinder, equipped with 3″& 6″taper chucks.
Movement of unwinding arms: by electrical motors
Maximum width of unwinding roll: 1300 mm
Maximum diameter of unwinding roll: 1000 mm
Maximum weight of unwinding roll: 1300 kg
Tension control: Air pressure fraction system (pneumatic brake by French Kortis) +IP (Japan SMC)
Maximum force of pneumatic brake 200 N/M
Constant tension keeping system: PLC adjust pneumatic brake force according the diameter too keep tension constant.
Line position correction system (LPC): Produced by E&L (Germany) rectify system use an optical sensor to control the non-transparent film edge or printing line. The sensor is fixed on the bracket, and the bracket can move following on the linear bearing. The adjusting speed is about 15mm/s, the distance of rectify deviation is about??plusmn;75 mm
2.2 Collection system: one film collection platform with suction pump.
2.3 Motor & inventor System
Main vector motor with power 4 kWt
Japan YASKAWA inventor
Special flat belt to transfer the motivity to driving shaft
|
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page